The SBus Port is horizontal port in bottom right corner of the image below and left to right the pins are;
signal, positive and negative.
Connect the Black, Red and Blue wires from the CC3D “Main Port” to the SBus port of the Receiver, in
the sequence shown above (Blue = Signal, Red = Positive, Black = Negative)
Now you should fix the VTX in place (as shown below) using double sided adhesive tape
To avoid potential damage to your VTX you should attach the antenna to it now, because if you connect
power to the VTX without the antenna in place – the VTX can be permanently damaged.
SELF TAPPING SCREW M3X6mm
WASHER
PLASTIC SCREW M3X6mm
M3X6mm
17
Summary of Contents for Anakin Club Racer
Page 1: ...Anakin Club Racer ENGLISH ...