6
2: Press the AUDIO IN button on the remote control to enter the mode. You can
also short press the source button on the soundbar to choose the AUDIO IN source.
3: The indicator light will lit in green.
Note: The playback is controlled by your device and by the buttons on the remote
control and the soundbar.
HDMI Source
1: Ensure that the soundbar is connected to the TV or other audio device via HDMI
cables.
2: Press the HDMI button on the remote control to enter the desired mode. You can
also short press the source button on the soundbar to choose the OPTICAL source.
3: The indicator light will lit in orange slow flashing.
Note: The device can synchronize the volume with the TV, and also with the
switch.
Trouble shooting
Troubles
Solutions
Pairing connection
via
Bluetooth
cannot
be
completed
Other mobile device has connected before use and the mobile device has
not left as well as its Bluetooth is not off. When it connects, Bluetooth of
this device will automatically find the Bluetooth device and connect. First,
turn off Bluetooth of the connected Bluetooth devices, then the next
Bluetooth device can be found and normally paired to connect.
Volume of playback
via Bluetooth is
small
1.
After connections with mobile devices, volume of Bluetooth device is not
up but at the default output level. Turn on the mobile device output.
2.
Output volume of Bluetooth device is low itself.
Connection
distance
via
Bluetooth is short
Obstruction exists between mobile devices and Bluetooth device. Remove
obstructions.
Connection
via
Bluetooth
right,
sometimes
1.
Obstruction exists between mobile devices and Bluetooth device. Remove
obstructions.
2.
Too far away from Bluetooth device to connected mobile devices, beyond
the connection range.
3.
Shorten the distance between the Bluetooth device and mobile devices.
Silent play after
connection
via
Bluetooth
After connections with mobile devices, Bluetooth device audio is off. Turn
on the mobile’s output volume.
