background image

Warrantee and Wing Repairs

The producer guarantees the correctness of the declared characteristics and the pa

-

raglider’s  normal  performance  for  one  year  after  the  purchase  date,  but  no  more 

than 200 flying hours. The producer conducts special, and after-warranty repairs 

and maintenance at the owners’ request for an extra price.

We  recommend  to  inspect  your  paraglider  (including  checking  suspension  line 

strength, line geometry, riser geometry and permeability of the canopy material) one 

time at two years, or every 100  hours of flying time (whichever comes first); Those 

inspection must be made by manufacturer or dealer.

If damaged, your Discovery-3 must be repaired by manufacturer, or dealer. 

Small holes in Gelvenor fabrics you can repair with silicon clue and a peace of Gel

-

venor cloth. Small holes in Skytex may be repaired with sticky rip-stop tape.

Attention please!

The producer bears no responsibility for non-compliance with the stated character

-

istics if:

- the user manual is not followed;

- the paraglider structure is changed in any way;

- the paraglider is self-repaired.

Serial number
Production date
Test pilot

Dealer
Date

Summary of Contents for DISCOVERY 3




















Reviews: