Assembly and Operating Manual
6
Fig. 14
- Locate the blue landing skid and apply
glue to the front of the fuselage. (white mark shows
the slot)
Fig. 17
-
Connect the electronic speed controller
and servos to the receiver. Refer to the radio
instructions for the correct channel sockets and
servo lead polarity.
Fig. 15
- Photo shows the finished view after the
skid is assembled.
Fig. 18
-
Locate the battery and canopy. Charge
the battery according to the safety instructions
before installing.
Fig. 16
- Glue the vertical stabilizer as shown in the
photo (glue not included).
Fig. 19
-
Photo shows battery leads connected to
the electronic speed controller.