Specifications
Provided by Skutt with purchase of Skutt KilnMaster kiln with LinkBoard and KilnLink
• 1 KilnLink Box for every 4 kilns.
• 1 KilnLink Power Supply 110-120V, 50-60HZ, 0.15A
• 1 LinkBoard per Kiln (installed at factory when ordered with new kiln)
• Current Sensor (standard on newer KM kiln models)
• 1 Phone Jack with 3-way splitter (for use with multiple kiln installation)
• 2 - 14 ft. RJ11 Cable (Straight through
*
) - Kiln to KilnLink Box connection
• Current firmware in controller. Guaranteed with purchase of kiln manufactured after
7/19/2012.
*
This looks likes a standard phone cord, but it is different. Use only cords supplied by Skutt.
Required by Customer for Installation
• Internet Connection (always on)
• 1 Ethernet Network Cable (sufficient length to connect KilnLink Box to internet.
• 120V Power Outlet within 6 ft of KilnLink Box location.
• KilnMaster Kiln controller with current firmware. Guaranteed with purchase of kiln
manufactured after 7/19/2012. (Controller must be replaced or upgraded if muanu-
factured prior to this date.)
Required by Customer for Operation - One or more of the following
• 1 Computer with Internet connection. Mac, PC or Unix/Linux.
• Cell phone plan with text (SMS) plan. (If text alerts are to be utilized. Unlimited text
plan recommended.)
• 1 Smart Phone. IOS, Android, or Blackberry (tested) if mobile web app is to be used.
2
KilnLink
Summary of Contents for KilnLink
Page 7: ...7 7 KilnLink ...
Page 8: ...8 KilnLink ...
