Page 3 of 4
3- Position the CK-1P8 box under the base telephone with the jacks facing towards the
back of the phone. (See Fig. 3).
LINE 1/2
LINE 2
FIG #3
Line 1 & 2 to Wall
Audio Cord from Player
4- Connect the short modular cord from [1&2 to Phone] on the CK-1 to the [LINE 1/2]
jack on the Phone.
5- Connect a MOD cord from Telephone Wall Jack 1&2 to [1&2 to Line] on CK-1.
6- Connect one end of the audio cord to the CK-1P8 in the AUDIO IN jack. Connect the
other end to the output of your audio player. Do NOT use the supplied Audio Adapter on
the CK1P8 side.
7- Connect the POWER CUBE from the CK-1 box to 115VAC power.
Testing the System:
1- Pickup line 1 on your telephone. The line one Green LED on the SENSOR BOARD
should light up. Repeat this test for line 2.
2. If both lines light up when picked up, the CK-1 is working properly. If the lights on
the SENSOR BOARD do not light up, then
a) Make sure that the CK-1 and Phone is connected to power.
b) Make sure that the SENSOR BOARD is aligned properly. (Fig 2)
