5
Once you’ve entered your basic profile information, follow the instructions on
your app:
1.
Make sure that your Bluetooth is turned on.
2.
Turn on your Aim.
3.
Select “Add New User” from the menu.
4.
You’ll see a PIN appear on your Aim. Enter this PIN into your Skulpt app.
5.
Wait until the sync is complete, and tap “Continue”.
Your app will then prompt you to measure your total body fat percentage and
Muscle Quality, by taking four measurements. Follow the instructions on the
app to continue.
Using your Aim
Taking Measurements
During setup, your app will tell you which muscle to measure.
Otherwise, you’ll need to select the specific muscle you wish to
measure from your Aim.
1.
Use the spray bottle provided to spray the sensors with water. This will
help the sensors make better contact with your skin.
2.
Place the device against the appropriate muscle as directed on the app,
and make sure all of the sensors are making contact with your skin. The
app will show you where to place the device.
3.
When the measurement is being taken, your Aim’s light ring will pulse in
color, and turn to a solid color when the measurement is ready.
