Although, if you’re having any challenges utilizing the Master Role Switching capabilities, you
may follow these simple steps to ensure ease of use when pairing and switching between Mono
and Stereo Modes.
Solution:
•
Please note – BOTH the LEFT and RIGHT bud for Jib™ True can be used in Mono
Mode, this is because the new tech allows Master Role Switching capabilities.
•
For the optimal Mono Mode functionality, first Power ON and pair your buds to your
device normally or as described in our troubleshooting section. This will ensure the
seamless transition between Stereo and Mono modes.
•
Once both Jib™ True buds are paired together, simply place the RIGHT or LEFT bud
back into the case; whichever you prefer! The remaining bud will stay paired and
function with both phone calls and music.
•
You will maintain bud functionality, but remember you will lose some of the media
control functionality such as “/-“, and “Track <</>>”, depending on which bud
was placed in the case when in Mono Mode. The RIGHT bud will always control
Volume Up and Track forward, and the LEFT bud will always control Volume Down and
Track Back.
•
If you would like to change back to Stereo Mode while in Mono Mode, simply pull the
other bud from the case at any time and you will hear a tone, or the music will seamlessly
begin to stream to indicate that you have automatically entered back into Stereo Mode.
•
Please Note
- If you’re having any trouble switching between the LEFT and RIGHT buds
in Mono Mode, you will need to follow the reset instructions explained above and clear
BOTH earbuds and re-pair to enter back into the correct paired state to allow the Master
Role Switching functionality.
BUDS NOT CHARGING IN CASE/CASE LID NOT
CLOSING PROPERLY?
Issue:
Not seeing the RED LED indicator on the bud when you’ve placed your JIB TRUE back
in the case?
Solution:
•
Wait momentarily as the buds connect, occasionally it takes a few seconds to begin
charging
