9
Press
< DONE
after you make sure that all the 3 dials are adjusted correctly. (in case of doubts refer to section 10.
Levelling The Printing Platform on page 17)
Levelling dials are located under the printing platform. They may seem difficult to turn at first.
Run a test
Y
our Skriware 3D Printer comes preloaded with a filament of your choice. Run a test print to ensure everything
was set up correctly. To do it press
in the main menu and then
REPRINT LAST MODEL
.
Voila! You are now ready to start an adventure with your very own Skriware 3D Printer.
Summary of Contents for Skriware 1
Page 1: ...User Manual...
