16
Technical User Guide
ECT/DCT 632-6 Fans
PRODUCT DESCRIPTION
The ECT/DCT fans particularly excel by having a brilliant build-up of the bearings, which ensures a long life
of the bearings without problems with water penetration. The fans have aluminium blades, which by and large
wear forever and are very sturdy. They will not be damaged by ice and dirt, which might fall on the blades. The
fans are CE-marked and have a special sturdy suspension in four “legs”, ensuring that the fan does not fall
down, even if one of the suspension “legs” is damaged.
ECT/DCT-Fans
409143 ECT 632-6 fan FF 230V 50Hz
S409143A ECT 632-6 fan FF 230V,five-core,5m cable
5 fan blades, 230V adjustable fan with aluminium fan blades.
Can be used both as a stepless triac controlled fan and as an
ON/OFF fan.
Low costs per m
3
/h.
High output and good pressure stability.
It should not be used at negative pressure higher than 40 Pa.
ErP 2015 approved.
409146 ECT 632-6 fan FF 230V 60Hz CSA
5 fan blades, 230V, 60 Hz adjustable fan with aluminium fan
blades.
Can be used both as a stepless triac controlled fan and as an
ON/OFF fan.
Low costs per m
3
/h.
High output and good pressure stability from 0-50 Pa.
It should not be used at negative pressure higher than 50 Pa.
ErP 2015 approved.
409144 DCT 632-6 fan FF 400V
S409144A DCT 632-6 fan FF 400V, 5m cable
5 fan blades, 400V adjustable fan with aluminium fan blades.
This fan is used as an ON/OFF fan, triac regulation is not possible.
Low costs per m
3
/h.
More energy economical than a similar 230V fan.
High output and good pressure stability.
It should not be used at negative pressure higher than 40 Pa.
ErP 2015 approved.
409154 DA 40 ECT 632-6 fan FF 230V
5 fan blades, 230V adjustable fan with aluminium fan blades.
Can be used both as a stepless triac controlled fan and as an
ON/OFF fan.
Low costs per m
3
/h.
High output and good pressure stability.
It should not be used at negative pressure higher than 40 Pa.
The fan can be used as air supply unit in equal pressure systems.
ErP 2015 approved.
