Technical User Guide
7
DA 74C Winch Motor
3
Mounting Guide
Check that all parts are present and undamaged before mounting the DA 74C winch motor.
3.1
Mounting DA 74C
3.1.1
On the Inlet Funnel
If, on delivery, the DA 74C is not mounted on the inlet funnel or it has to be retrofitted, follow the instructions
below.
Turn the swivel shutter to closed position.
The factory has prepared the winch motor for mounting on a
closed swivel shutter.
Figure 2: Swivel shutter in closed position
Press the DA 74C onto the swivel shutter shaft.
Mount the retaining disc
(A)
and locking screw
(B)
.
Check the position by activating the manual release
(C)
, and turn
the swivel shutter counter- clockwise until it opens against
the mechanical end stop, Figure 4.
Figure 3: DA 74C
Activate the manual release
(C)
, and turn the swivel shutter
clockwise until it is in closed position, Figure 2.
Figure 4: Swivel shutter in open position
(B)
(C)
(A)
