7
SKOPE PEGASUS PG600/1300VC
Installation and Operating Instructions
1.3 Shelving
For each door on the cabinet there are five sets of stainless steel
tray slides and five plastic coated wire shelves. The tray slides can
be positioned at different heights to suit various products. The wire
shelves can either be slid into the tray slides or substituted by 1/1 or
2/1 Gastronorm trays.
To fit the shelving:
1. Unpack the shelving items from inside the cabinet.
2. Establish the desired position for each of the shelves, based on
the height of the product intended to go on each shelf.
3. Fit the stainless steel tray slides into the corresponding slots in
both the front and back support rails. Each shelf requires two
tray slides (see Figure 2 below).
4. Slide each wire shelf into the corresponding pair of tray slides
(see Figure 3 below).
Figure 2:
Fitting the Tray Slides
Figure 3:
Fitting the Wire Shelves
INSTALLATION
1
