54
Replacement Procedures
Service Manual
SKOPE OD460
Cleaning
Ensure the cabinet is disconnected from the mains power supply before
cleaning the cabinet.
Cabinet
When necessary, wipe both the interior and exterior of the cabinet with a
damp cloth.
The bottom shelf can be removed to assist with cleaning by undoing the two
side fixing screws. Ensure the bottom shelf is refitted before reconnecting
the chiller to the power supply.
Interior Mirrors
Only applicable to cabinets with interior mirrors. Wipe the mirrors clean with
a damp cloth. The bottom mirror can be lifted up and out of the cabinet to
assist with cleaning around and under the mirror.
Condenser
Coil
To ensure trouble-free performance, the condenser coil must be kept clean.
We strongly urge monthly cleaning with a soft brush to remove dust and fluff.
A thorough cleaning is required by qualified service personnel every six
months. The condenser coil
must
be kept clean for efficient and reliable
operation.
To clean the condenser coil
CAUTION
Do
NOT
wash any liquid down into the refrigeration system,
as this could lead to refrigeration failure.
WARNING
Disconnect the chiller from the power supply before cleaning
the condenser coil.
1. Remove the front panel and isolate the chiller from the power supply (see
page 37).
2. Brush the condenser coil
with a soft brush
3. Refit the front panel and reconnect to the power supply.
Condenser coil