3
Fuel tank lid unit
3.1
Fuel-tank lid unit - Summary of components
1 - Locking mechanism
2 - Fuel tank lid unit
❑ Removing and installing
3 - Water drain hose
❑ Laid between the wheel‐
house and the wheel‐
house liner.
3.2
Removing and installing fuel tank lid unit
3.2.1
Removing
– First pierce the unit in the upper area with a thin screwdriver
- 4 - or a nail - 1 - - 2 - in the - direction of arrow a - .
– Lightly ress the screwdriver in the -direction of arrow b - the
catches - 5 - will be unlocked as a result.
– After unlocking the upper latches, slightly swivel the unit out
of the side panel. The lower catches should then extend up‐
wards. If the lower area can not be removed, proceed as in the
upper area.
– Remove the rubber grommet from the fuel filler neck.
– Remove the fuel tank lid unit from the side section.
3.2.2
Installing
– The installation occurs in reverse order.
Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
42
Rep. gr.55 - Bonnet, rear lid
