Original hands free phone kit for retrofitting
3
−
Insert the single core wires of the wiring set into the radio
connecting plug according to the following table. Tick-off the
changes made in the table column "completed".
−
Insert the locking pin back into the radio connecting plug (see
page 3, Fig. 1, -2-).
Note
With those vehicles fitted with a factory installed CD changer, the
green flat contact housing (see Fig. 1, -1-) is already installed. In
this case, use the flat contact housing in the vehicle. If a CD
changer is not installed, use the flat contact housing provided.
−
Unlock the green flat contact housing -Arrow A- and take out
the bay contact housing -1- -Arrow B-.
−
Assemble the bay contact housing -1- according to the
following table using the free wires in the wiring set. Tick-off
the changes made in the table column "completed".
−
Insert the green flat contact housing -1- of the wiring set into
the radio connecting plug.
−
Re-mount the radio/radio navigation system.
⇒
Vehicle repair manual
wire colour
to PIN/radio connecting plug
completed
orange/violet
PIN 9
orange/brown
PIN 10
yellow/red
PIN 15
brown
PIN 12
wire colour
to PIN/Bay contact housing
completed
blue
PIN 12
yellow
PIN 6
green/brown
1)
PIN 11
white/brown
1)
PIN 5
1)
are not required with RNS2CD and RNS2DVD
VOT-1549
1
VOT-0583
1
A
B
VOT-1456
1
A
B
VOT-1549
1
