ASSEMBLY
ONLY secure stakes where
indicated above.
2.
Webbing attachment
1.
2.
1.
1.
PERFECT FOR PRACTICE WITH:
4-WAY GRAVITY-DROP AND REBOUNDER SYSTEM
TRUE-FLIGHT ULTRA-DURABLE BATTING TRAINER
QUICKSWING
®
PX4
5-POSITION BRUSH TEE
» Auto-feeds 12 baseballs or 8 softballs every
6, 8 and 10 seconds for quick hands and reaction training
» Use with practice or regulation balls
» The ultimate system for developing fast hands, sharp
reaction times, and solid mechanics
» Four configurations: Auto-feed gravity drop, rebounder for
tee hitting, rebounder angled for soft toss and rebounder
angled for turn around double play
» Standard tee with brush top and height adjustment
» Positions for 5 different zones across the plate
» Helps build confidence and hand-eye coordination in
youth players
» 15” base, with telescoping tee arm
» Brush top provides more realistic ball flight, feel and
feedback — get cleanly through the ball without any shock
to the bat or hands
» Sets up quickly and easily
Auto-feed gravity drop
Rebounder for tee
simulation
Rebounder for angled
soft toss
Rebounder for angled
turnaround double play
Remove the pitching target and place into the carry bag. Remove the ground stakes and place
them in to the carry bag.
WARNING: Sport Net is under tension when assembled. Please take the utmost care when
releasing the tension during disassembly. Failure to do so may result in injury.
Hold one pin in one hand and one Tension-Tite arm pole in the other while pulling the pin out.
Repeat on the other side. Remove the
net webbing loops
from each side of the frame. If needed,
air dry the net before you fold and place it into the bag. Pull the Tension-Tite arm poles out of each
side of the base frame and unlink and fold them down to store.
NOTE: Store Tension-Tite arm pole in the carry bag with the round tops facing away from
each other. Unlock the push buttons on the base frame to unlink the frame. Fold and store in
carry bag.
STORING YOUR
QUICKSTER
®
B
Push Button Attachment
C
C
2.
Top Attachment
Bottom Attachment
fabric loop
fabric loop
SIDE
STEP 1
BASE FRAME & TENSION-TITE
™
ARM POLE
STEP 4
SECURE THE QUICKSTER TO THE GROUND
NOTE: Base Frame and Tension-Tite arm poles come pre-
attached by elastic.
Layout one Tension-Tite Arm Pole (C) and link together to form
a straight pole. Repeat with second Tension-Tite Arm Pole.
Layout Base Frame (B) and link the frame together. Make sure
to secure the poles with the push buttons.
NOTE: The slight bowing on the Base Frame is part of the
Tension-Tite system design.
Slide the Tension-Tite™ Arm Poles into each side of the Base
Frame.
NOTE: Ensure arm poles are fully inserted. Failure to do so may
result in damage to the Sport Net.
Place Quickster in the desired location and ensure it is on level
ground. Secure frame with included Ground Stakes. Ground
Stakes can be secured with hand, foot or mallet.
NOTE: Do not use Ground Stakes on the back of the base
frame. Poles will bend and tension system will not
function properly.
NOTE: Care should be taken when pressing in the ground
stakes. Poles can be bent if driven too far into the
ground or hard surface.
CAUTION: Make sure the Quickster is secured into the ground
before play. During play, make sure that the Ground
Stakes are secured regularly as a loose Ground
Stake may cause injury.
1
–
Unfold the Net (A) and make sure that the top Quickster logo
on the net is facing away from the frame. Connect the net loops
on the bottom of the net to each side of the frame.
2
–
Slide the pin at the top of the net into the top of the Tension-
Tite Arm Pole. Repeat on the other side.
NOTE: Check the frame to make sure it is securely and fully
assembled with the net before securing to the ground.
Unfold the Target (E) and find the top straps (these have adjustment buckles on them). Attach hook of the top
strap through the fabric loop at the top left corner of the net, repeat on the other side. Take one of the bottom
straps of the target and hook through fabric loop on the bottom corner of the net, repeat on the other side.
STEP 2
CONNECT THE NET TO THE FRAME
STEP 3
ATTACH PITCHING TARGET (OPTIONAL)
2081 Farday Ave Carlsbad, CA 92008 | 877.225.7275 | SKLZ.com
US Patent #8,246,496 | Made in China
SKLZ offers a limited 1-year warranty for this product, visit SKLZ.com for full
warranty details and to register your product.
SportNet_ALL_Instr_11X17_sV6.indd 2
5/19/14 4:21 PM