SIDE
HOW TO
HOW TO
VISIT SKLZ.
COM
FOR INSTRUCTIONAL VIDEO AND CONTENT
QUICKSTER
®
REP NET
ASSEMBLY
PERFECT FOR PRACTICE WITH:
STEP 1
BASE FRAME & TENSION-TITE
™
ARM POLE
STEP 2
CONNECT THE NET TO THE FRAME
STEP 4
BUCKET RECOMMENDATIONS
NOTE – Base Frame and Tension-Tite arm poles come
pre-attached by elastic cords.
1.
Lay out one Arm Pole (C) and link together to form a
straight pole. Repeat with second Tension-Tite Arm Pole.
2.
Lay out Base Frame (B) and link the frame together. Make
sure to secure the poles with the push buttons.
3.
Lay out cross bar (D) and link together.
4.
Slide tube on cross bar over base frame. Rivet will keep
cross bar in place.
NOTE – The slight bowing on the Base Frame is a normal
part of the Tension-Tite system design.
5.
Slide the Tension-Tite Arm Poles into each side of the
Base Frame.
NOTE - Ensure arm poles are fully inserted. Failure to do so
may result in damage to the
QUICKSTER
.
1.
Unfold the Net (A) and slide the metal pin at the top of one
corner of the net into the top of the
Tension-Tite
Arm Pole.
Make sure that the
QUICKSTER
logo on the net is facing away
from the frame. Repeat on the other side.
2.
Attach bottom Net loop attachments to the plastic post hooks
on each side of the base frame.
3.
Clip back of net to Arm Pole. Follow illustration #3 for
placement.
4.
Clip webbing straps to the base frame.
5.
Wrap the bottom of the net under the back base frame and
Velcro around the side base frame.
NOTE: Check the frame to make sure it is securely and fully
assembled with the net before securing to the ground.
QUICKSTER
REP NET funnels the balls into the central hole.
Place a bucket (not included) or other capture device to
collect the balls.
PUSH BUTTON ATTACHMENT
INSTALL CROSS BAR
C
C
B
B
D
2.
5.
4.
3.
1.
STEP 3
SECURE THE
QUICKSTER
Place
QUICKSTER
in the desired location and ensure it is on
level ground. Secure frame with included Ground Stakes.
Ground Stakes can be secured with hand, foot or mallet.
NOTE: Do not use Ground Stakes on the back of the base
frame. Poles will bend and tension system will not
function properly.
NOTE: Care should be taken when pressing in the ground
stakes. Poles can be bent if driven too far into the
ground or hard surface.
CAUTION: Make sure the
QUICKSTER
is secured into the
ground before play. During play make sure that
the Ground Stakes are secured as a loose Ground
Stake may cause injury.
ONLY SECURE STAKES WHERE INDICATED ABOVE.
WARNING
:
QUICKSTER
is under tension when assembled. Please take the utmost care when
releasing the tension during disassembly. Failure to do so may result in injury.
Hold one pin in one hand and one Tension-Tite Arm Pole in the other while pulling the
pin out. Repeat on the other side. Remove the net loop attachments from each side of
the frame. If needed, air dry the net before you fold and place it into the carry bag.
Pull the Tension-Tite Arm Poles out of each side of the base frame and unlink and fold
them down to store.
Fold up and place into the carry bag. Remove the Ground Stakes and place them into
the carry bag.
NOTE: Store Tension-Tite Arm Pole in the carry bag with the round tops facing away
from each other.
Unlock the push buttons on the Base Frame to unlink the frame. Fold and store in
carry bag.
STORING YOUR
QUICKSTER
» Adjustable height and distance
» Automatically tosses balls every 8 seconds
» Use regulation baseballs for hitting training during
practice or pregame warm-up
» Use 9” plastic balls for pop fly practice
» Use regulation baseballs to practice footwork and
glove-hand ball transfer
SOFT TOSS MACHINE AND FIELDING TRAINER
CATAPULT
1.
3.
2.
4.
5.
CLIP
LOOP ATTACHMENT
SIDE BASE FRAME
(BUCKET IS NOT INCLUDED)
BACK BASE FRAME
VELCRO
D
B
B
C
C
E
SETUP
CATAPULT WITH
QUICKSTER
®
REP NET
1.
Place CATAPULT behind crossbar as shown and align the
ball return hole with the top of the ball feeder.
2.
Use the Velcro strap on the REP NET ball return hole to
attach the net to the CATAPULT ball feeder.
1.
2.
(CATAPULT IS NOT INCLUDED)
