IN THE BOX
GETTING STARTED
VISIT SKLZ.COM TO LEARN MORE
Lower Fiberglass Poles (4)
Top Fiberglass Poles (2)
Dual Return Net
Carry Bag
D
E
F
G
Step 1
Lay out all 5 base frame pieces.
Connect back bar of base frame by inserting the
angled back bars (B) to each side of the center back
bar (A) via push pins.
Step 2
Connect each side bar (C) to the angled back bars
(B)
via push pins.
Step 3
Connect two lower fiberglass poles (D), repeat step
for opposite side.
Note: Top Fiberglass Pole (E) will be inserted in
following steps.
Step 4
Layout net (F) with the return net side facing down,
and the SKLZ logo sleeves facing up. Slide each
sleeve over the connected Fiberglass Poles (D)
assembled in step 3.
Insert connected fiberglass pole into the base frame.
Repeat on opposite side.
Note: Once the first side is inserted the second side
will need a slight bend to insert fiberglass poles into
the base frame.
Step 5
Connect top fiberglass poles (E) to each side.
Grab white loop at the top corner of the net (F),
and attach white loop to the top of fiberglass
pole (E). Repeat on opposite side.
Note: Bend pole inward if you cannot reach top
of pole.
Step 6
Attach bottom of net (F) via black loop to side bar of
base frame (C). Repeat on opposite side.
Base Frame Center Back Bar
Base Frame Angled Back Bars (2)
Side Bars (2)
A
B
C