IN THE BOX
Remove all pieces from the Fielding Trainer box, remove plastic covering and group together as outlined below.
• 10 frame pieces (A-L)
• 2 corner joints (I-J, included in bungee bag)
• 1 black and yellow net (N)
• 30 bungee cords (M)
ASSEMBLING THE FRAME
1. Remove black protective caps from end of all poles. Black Protective caps can be discarded once removed as they are
only used to avoid damage to edges.
2. Begin by assembling the base portion of the Fielding Trainer by connecting section A into B and C.
3. Begin assembling the frame and target portion of the Fielding Trainer by attaching part D to part C, E and B.
4. After the base has been completed and the beginning of the target frame has been started, attach part F to part D, G and E.
5. Attach the corner joints (I and J) to H (24 inch black tubing).
6. After the bracing bar has been built, attach bar to black tubes extending from parts F and G.
NOTE:
The corner joints should be attached to the bracing bar with the plastic tabs on the inside of the base.
7. Attach K and L. Once complete, attach K to F and L to G. The target frame and base are now fully constructed.
ASSEMBLING THE NET
1. Use the bungees (M) to attach the net (N) to the yellow target frame.
NOTE:
It is recommended to use 8 bungees on the left and right sides and 7 bungees on the top and bottom.
Once net is attached, move the Fielding Trainer to an open space to begin training.
NOTE:
See included training guide for recommended drills or visit sklz.com/FieldingTrainer for extra training content
VISIT SKLZ.COM TO LEARN MORE
FIELDING TRAINER
A
B
C
D
E
F
G
H
I
J
K
L
M
N
ASSEMBLY
BUNGEES (30)
NET