SKLZ.com
CATAPULT
™
ASSEMBLY:
STEP 1
–ATTACH LEGS TO CATAPULT BASE
Attach one Leg (E) to each side of the Catapult Base (A)
by screwing into place.
STEP 2
–ASSEMBLE SPIRAL BALL FUNNEL
Attach Spiral Ball Funnel Top (B) to Mid-Section (C) by
aligning notches. Lock into place by connecting push-thru
tab on end of Spiral Ball Funnel. Attach Spiral Ball Funnel
Bottom (D) in the same manner.
STEP 3
–ATTACH SPIRAL BALL FUNNEL TO
CATAPULT BASE
Lower center of Spiral Ball Funnel on to cylindrical fitting
at top of Catapult Base (A). Align end of funnel with
u-shaped opening on Catapult Base (A). Secure by
connecting push-thru tab on side of Catapult Base and
end of Spiral Ball Funnel.
CATAPULT USAGE:
ADD BALLS TO MACHINE
Prior to starting the machine add up to
8 balls to the Spiral Ball Funnel.
ADJUST BALL FLIGHT ANGLE
WARNING: Before adjusting the ball flight
angle turn OFF the Catapult.
Loosen the trajectory lever knob at the front
of the machine. Adjust leg up or down to
adjust the ball flight angle. Tighten trajectory
lever knob.
Stabilize Catapult by adjusting the rear
stability bar. Unscrew knobs on both sides
of the bar and adjust height so that the bar
rests on the ground. Secure into place by
tightening each knob.
A
E
C
B
Trajectory Lever Knob
