4
• Permitted ambient temperature (tool/charger/battery):
-
when charging 4...40°C
-
during operation –20...+50°C
-
during storage –20...+50°C
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
EXPLANATION OF SYMBOLS ON TOOL
3
Read the instruction manual before use
4
Do not dispose of electric tools and batteries together with
household waste material
USE
• Charging battery
! read the safety warnings and instructions provided
with the charger
• Removing/installing the battery
1
! read and follow the instruction delivered with the
charger or power supply
• Battery protection
The tool is suddenly being switched off or prevented from
being switched on, when
-
the load is too high --> remove load and restart
-
the battery temperature is not within the allowable
operating temperature range of -20 to +50°C --> 2
levels of the battery level indicator start flashing when
pressing button
5
c; wait until battery has returned within
the allowable operating temperature range
-
the battery is nearly empty (to protect against deep
discharge) --> a low battery level or flashing low battery
level
5
b is shown by the battery level indicator when
pressing button; charge battery
! do not continue to press the on/off switch after the
tool is switched off automatically; battery may be
damaged
• On/off
1
-
press and hold button for 1 second to turn on the speaker
-
indicator will start flashing
-
press and hold button for 3 seconds to turn off the
speaker
! after approx. 45 minutes of inactivity the speaker will
automatically turn off
• Volume
-
use buttons to increase or decrease the volume
• Play/Pause
-
use the Play/Pause button to play or pause a track
• Bass
-
to add extra bass, press the Bass button
-
to turn off the extra bass, press the Bass button again
• Connecting with Bluetooth
-
turn on the speaker and it will automatically enter into
Bluetooth pairing mode
-
indicator will start flashing
-
the speaker will automatically try to connect to the last
device it was paired to
-
if no connection can be made, the speaker will be
available for connection to other Bluetooth devices for
approx. 10 minutes
! after approx. 45 minutes of inactivity the speaker will
automatically turn off
-
when a connection is made, the indicator will turn blue
continuously
-
to pair to a different device press and hold the Bluetooth
pairing button for 3 seconds
-
indicator will start flashing
! read the instructions provided with your device
• Connecting with AUX
1
INTRODUCTION
• This tool is intended for streaming audio from Bluetooth
devices or connecting an audio source to the auxiliary input
socket (AUX)
• This tool is intended for using a SKIL battery pack as power
source for USB devices
• This tool is not intended for professional use
• Read this instruction manual carefully before use and
save it for future reference
SAFETY
• This tool can be used by children aged 8 and above
and by persons who have physical, sensory or mental
limitations or a lack of experience or knowledge if a
person responsible for their safety supervises them
or has instructed them in the safe operation of the
tool and they understand the associated dangers
(otherwise, there is a danger of operating errors and
injuries)
• Supervise children (this will ensure that children do not
play with the tool)
• Cleaning and user maintenance of the tool shall not be
made by children without supervision
• Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
• Store the tool indoors in a dry and locked-up place, out of
reach of children
• Do not use tool/charger when damaged; take it to one of the
officially registered SKIL Service Stations for a safety check
• Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
• Provide for good ventilation at the working place
BATTERIES
• Use power tools only with specifically designated
battery packs. Use of any other battery packs may create
a risk of injury and fire.
• Only use the following batteries and chargers with this
tool
-
SKIL battery: BY5197E-03 BY5196E-03
-
SKIL charger: SC5358E-01 QC5360E-01 QC5359E-00
• When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
• Do not use a battery pack or tool that is damaged
or modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or risk
of injury.
• Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or temperature
above 130°C may cause explosion.
• Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage the
battery and increase the risk of fire.
