6
• Inflating
-
to start inflating, press start/pause button
-
the actual pressure is shown
! when the actual pressure is higher than the target
pressure, the tool will not start inflating
-
to pause or stop inflating, press start/pause button
again
-
the tool stops when the target pressure is reached
-
the tool stops when the target pressure is reached
! the actual pressure may drop after the tool has
stopped; you may restart inflating until the target
pressure is reached
! the tool may stop without reaching the target
pressure when a low target pressure is set (<
2 bar); you may restart inflating until the target
pressure is reached
! allow the tool to cool down for 5 minutes after
each 15 minutes of continuous use
HIGH VOLUME FUNCTION
• Inflating
-
connect the high volume air hose to the air outlet
w
-
connect the other end of the hose to the item to be
inflated directly or with the tapered adapter
! ! make sure that the high volume function is
selected
q
b
-
to start inflating, press button
-
to pause or stop inflating, press button again
! ! the tool does not stop automatically when high
volume function is chosen
! ! allow the tool to cool down for 5 minutes after
each 15 minutes of continuous use
• Deflating
-
for deflating, follow the instruction above, but connect
the high volume air hose to the air intake
e
MAINTENANCE
• This tool is not intended for professional use
• Always keep tool clean (especially ventilation slots)
! remove battery from tool before cleaning
ENVIRONMENT
• Do not dispose of electric tools, batteries,
accessories and packaging together with household
waste material. The electric tools, accessories and
packaging should be sorted for environmental-
friendly recycling
! prior to disposal protect battery terminals with
heavy tape to prevent short-circuit
Summary of Contents for PWRCORE 20 IF5940E-00
Page 8: ......
