5
Do not use a battery pack or tool that is damaged or modified.
Damaged or modified
batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
Do not expose a battery pack or tool to fire or excessive temperature.
Exposure to fire or
temperature above 265 °F may cause explosion.
Follow all charging instructions and do not charge the battery pack or tool outside the
temperature range specified in the instructions.
Charging improperly or at temperatures
outside the specified range may damage the battery and increase the risk of fire.
Service
Have your power tool serviced by a qualified repair person using only identical
replacement parts .
This will ensure that the safety of the power tool is maintained.
Never service damaged battery packs .
Service of battery packs should only be performed
by the manufacturer or authorized service providers.
SAFETY WARNINGS FOR HAMMER DRILL
Safety instructions for all operations:
Wear ear protectors when impact drilling .
Exposure to noise can cause hearing loss.
Hold the power tool by insulated gripping surfaces, when performing an operation
where the cutting accessory or fasteners may contact hidden wiring .
Cutting accessory
or fasteners contacting a “live” wire may make exposed metal parts of the power tool “live”
and could give the operator an electric shock.
Safety instructions when using long drill bits:
Never operate at higher speed than the maximum speed rating of the drill bit .
At higher
speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece,
resulting in personal injury.
Always start drilling at low speed and with the bit tip in contact with the workpiece .
At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the
workpiece, resulting in personal injury.
Apply pressure only in direct line with the bit and do not apply excessive pressure .
Bits
can bend causing breakage or loss of control, resulting in personal injury.