Skil DP9505-00, Owner'S Manual

Page: 15 / 96

15
UNPACKING AND CHECKING CONTENTS
WARNING
To reduce the risk of injury, never connect plug to power source
outlet until all assembly steps are complete and until you have read
and understood the entire owner’s manual.
Model DP9505-00 Drill Press is shipped complete in one box.
1. Separate all parts from packing materials and check each one with the “Table of Loose
Parts” to make sure all items are accounted for before discarding any packing material.
WARNING
If any parts are missing, do not attempt to assemble the drill press,
plug in power cord or turn the switch on until the missing parts are
obtained and are installed correctly .
2. Remove the protective oil that is applied to table, base and column. Use any ordinary
household type grease and spot remover.
WARNING
To avoid fire or toxic reaction, never use gasoline, naphtha, or similar
highly volatile solvents.
3. Apply a coat of furniture paste wax to the table, column and machined surfaces of base to
prevent rust. Wipe all parts thoroughly with a clean dry cloth.
Table of Loose Parts
ITEM DESCRIPTION QTY .
A Head Assembly 1
B Base 1
C Table/Support Assembly 1
D Column & Flange Assembly 1
E Table Support Lock Handle 1
F Feed Handle Rods 3
G Crank Handle 1
H Chuck Key 1
I Chuck 1
J Hex Head Bolts (M8 x 20) 3
K Hex Wrench (3 mm) 1
L Hex Wrench (4 mm) 1
A
F
G
C
E
H
B
D
J
K
L
I