20
MAINTENANCE
Service
WARNING
Preventive maintenance performed by unauthorized person nel may
result in misplacing of internal wires and components which could
cause serious hazard. We recommend that all tool service be performed by a Skil Factory
Service Center or Autho rized Skil Service Station.
Tool Lubrication
Your Skil tool has been properly lubricated and is ready to use. It is recommended that tools
with gears be regreased with a special gear lubricant at every brush change.
Carbon Brushes
The brushes and commutator in your tool have been engineered for many hours of
dependable service. To maintain peak efficiency of the motor, we recommend every two to six
months the brush es be examined. Only genuine Skil replace ment brushes specially designed
for your tool should be used.
Cleaning
WARNING
To avoid accidents always dis connect the tool from the power
supply before cleaning or performing any main tenance. The tool may
be cleaned most effectively with compressed dry air.
Always wear safety gog gles when
cleaning tools with compressed air.
Ventilation openings and switch levers must be kept clean and free of foreign matter. Do not
at tempt to clean by inserting pointed objects through openings.
CAUTION
Certain cleaning agents and sol vents damage plastic parts. Some of
these are: gasoline, carbon tetrachlo ride, chlo rinated cleaning solvents,
ammonia and house hold detergents that contain ammonia.
Summary of Contents for 9295
Page 70: ...70...
