19
TROUBLE SHOOTING
WARNING
Read instruction manual first! Remove plug from the power source before
making adjustments or assembling accessories.
Problem
Cause
Remedy
Tool will not start
1. Power cord is not plugged in. 1. Plug tool into power source.
2. Power source fuse or circuit
breaker tripped.
2. Replace fuse or reset tripped circuit
breaker. (If the product repeatedly causes
the circuit or fuse to trip/blow, discontinue
use immediately and have it serviced by an
Authorized Skil Service Center or Service
Station.)
3. Cord damaged.
3. Inspect cord for damage. If damaged,
have cord replaced by an Authorized Skil
Service Center or Service Station.
4. Burned out switch.
4. Have switch replaced by an Authorized
Skil Service Center or Service Station.
Tool does not
come up to
speed
1. Extension cord has insufficient
gauge or is too long.
1. Replace with adequate extension cord
(Page 18).
2. Low house voltage.
2. Contact your electric company.
