-6-
Operating Instructions
Battery Installation
Only use the battery packs and batteries
specified.
Mounting battery pack in car:
1. Open top cover of the car, by pressing tab
release button at rear of car, figure 2.
2. Connect a charged SKIL battery pack to
the plug of the car
3. Replace the top of the car
Mounting battery in Transmitter:
1. Unscrew and remove battery cover located
on the back of the transmitter, as shown in
figure 3.
2. Install one 9V battery.
3. Replace the cover.
Operation
1. Set the power switch of the car to “ON”,
figure 4.
2. Use of Transmitter, figure 5:
• Press the left stick up or down for
forward or reverse motion.
• Press the right stick right or left to steer
the car.
3. If the car fails to go straight, adjust the
neutral steering alignment, figure 4.
FIG. 2
FIG. 3
FIG. 4
FIG. 5
