31
STARTING PROCEDURE
• Re-check throttle control lever operation. Apply brake.
• Ensure that the emergency cut-out switch is in the ON position.
• Ensure the tether cut-out cap is in position and that the cord is
attached to your clothing.
Initial Cold Starting
NOTE:
Do not operate the throttle lever.
• The Digital Performance Management (DPM) system controls the
carburetion at all temperatures. There is no need to operate throt-
tle when starting with engine warm, cool or cold.
Manual Starting
Insert the key in the ignition switch and turn to ON position.
Grasp manual starter handle firmly and crank engine.
Disengage brake before moving vehicle.
Electric Starting
Insert key in ignition switch.
Turn key clockwise until starter engages.
Release key immediately when engine has started.
NOTE:
If for some reason, the snowmobile cannot be started elec-
trically, place ignition key to ON position and start engine manually.
Emergency Starting
The engine can be started with the emergency starter rope supplied
with the tool kit.
Remove belt guard.
◆
WARNING
Do not apply throttle while starting.
◆
WARNING
Do not wind starting rope around your hand. Hold rope by
the handle only. Do not start the snowmobile by the drive
pulley unless it is a true emergency situation. Have the snow-
mobile repaired as soon as possible.
mmo9705b.fm5 Page 31 Tuesday, May 20, 1997 3:15 PM
