regulated 5V DC and delivers at least 1.2A with Micro USB Plug. Adapter that
does not meet these specifications AC adapter to the intercoms before you
connect them to AC power. When you finish, disconnect the adapter from AC
power before you disconnect them
from the intercoms.
Setting Channels
Follow these steps to prepare different devices to different channels for use:
If you need to assign your device to CHANNEL 2.
1)
To turn on the intercom: press and hold the key about three
seconds. The CHANNEL BUTTON 1 lights automatically (this is factory
default channel). Sounds a BEEP tone. The CTCSS switch is location C on the
side of unit.
2)
Press and hold down (keep pressing) the
CHANNEL button “2” for more
than 3 seconds until you hear a BEEP tone
sounds. When you are still
pressing the button (without releasing it) and
the CHANEL button “2” lights.
That’s it, now you successfully set up this unit as CHANNEL 2,
Connect USB cable and adapter
SK12V6
Switch of CTCSS
