Information on the EC Declaration of Conformity and the EC Declaration of Incorporation
Page 4
EN
EN
Information on the EC Declaration of Conformity and the EC Declaration of
Incorporation
For the following product:
Centrifugal pump
Belonging to the following series:
MFEx model
PSR…
We hereby confirm that this product complies with
the relevant safety requirements specified in the
applicable directives of the Council concerning the
approximation of the laws of the Member States,
viz.:
•
Machinery Directive 2006/42/EC
•
Low Voltage Equipment 2006/95/EC
•
Electromagnetic Tolerance 2004/108/EC
...
Information:
(a)
This declaration certifies compliance with the
named regulations but does not guarantee
characteristics.
(b)
The safety instructions in the documentation
enclosed with the product must be observed.
(c)
The commissioning of the certified products is
prohibited until it has been ensured that the
machine, vehicle, or similar unit into which the
product has been installed complies with the
conditions and requirements of the applicable
directives.
(d)
The operation of the products on a non*
standard mains voltage as well as non*
compliance with installation instructions can
affect EMC characteristics and electrical safety.
Furthermore:
•
The aforementioned product is intended, in
accordance with
EC Machinery Directive
2006/42/EC, Appendix II, Part B
, to be
installed in a machine/assembled with other
machines to form a superordinate machine. It
may not be commissioned for applications
within the scope of this EC directive until it has
been determined that the machine in which
this product is installed complies with the
conditions of the aforementioned directive.
•
The product may only be used as intended and
in accordance with the instructions in the
documentation with due observance of
EC
Directive 97/23/EC regarding pressure
equipment
. Please closely observe the
following:
The product is neither designed nor approved for
use in conjunction with fluids belonging to Group 1
(hazardous fluids) as defined in Article 2,
Paragraph 2 of Directive 67/548/EC of 27 June
1967.
The product is neither designed nor approved for
use in conjunction with gases, liquefied gases,
gases dissolved under pressure, vapours, or fluids
with a vapour pressure of more than 0.5 bar above
normal atmospheric pressure (1013 mbar) at the
maximum permitted temperature.
Products supplied by SKF Lubrication Systems
Germany GmbH do not reach the limit values listed
in Article 3, Paragraph 1, Points 1.1 to 1.3 and
Paragraph 2 of Directive 97/23/EC. This means
that they are not subject to the requirements of
Appendix I of this Directive. They therefore do not
have a CE mark as per Directive 97/23/EC. SKF
Lubrication Systems Germany GmbH classifies
products in accordance with Article 3, Paragraph 3
of the directive.
The Declaration of Conformity and Incorporation
forms an integral part of the documentation and is
delivered with the product.
