SKF Multilog On-Line System IMx-M, User Manual, Page: 119 / 313

Protection
Protection Module Configuration with IMx-M Manager
SKF Multilog On-Line System IMx-M 2 - 99
User Manual
Figure 2 - 75.
Launching the Slot Properties Dialog.
Each IMx-M slot has two core property settings:

Assigning Protection Settings (PRM) where a device number (slot identity) and
Modbus settings are set.

Configuring Network Settings (CMM) where the network settings are set.
Assigning Protection Settings (PRM)
This will launch the PRM + CMM slot properties dialog PRM where a unique device
number (slot identity), PIN code and Modbus settings are set.
Figure 2 - 76.
Slot Properties Dialog.