Introduction to the SKF GX Series Microlog
SD Memory Card Operation
Figure 1 – 15.
Hardware Installation.
•
Microsoft ActiveSync or Mobile Device Centre launches and asks to
Set Up a
Partnership
. Select
No
and click
Next
. ActiveSync displays its
Connected
dialog.
The required drivers are now installed and the Microlog is able to communicate
with the host PC.
SD Memory Card Operation
SD and SDHC cards (up to 16 GB) may be inserted when th
e instrument is powered on
or off. Memory cards must be properly formatted prior to use.
IMPORTANT – The SD card should not be disconnected in hazardous areas, it must
be connected / disconnected in safe areas only.
The Microlog GX is only certified for use with the following SD card:
•
Sandisk: Secure Digital Card SDSDx-yyy
SD Card Memory Advantages
SD cards provide greater memory flexibility for ROUTE storage than the internal
memory. SD cards are flexible and mobile, which is efficient in plants with more than
one Microlog. Independent ROUTEs can also be stored on different SD cards.
For more information on configuring
ROUTE Memory
settings,
reference the
System Settings
section in
Chapter 2, How to Set
Up Your GX Series Microlog
.
SKF Microlog - GX Series
1 - 27
User Manual