skf.com
http://www.skf.com
® SKF, @PTITUDE and MICROLOG are registered trademarks of the SKF Group.
Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.
ICP is a registered trademark of PCB Group, Inc.
All other trademarks are the property of their respective owners.
© SKF Group 2017
The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permis-
sion is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be
accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein. SKF
reserves the right to alter any part of this publication without prior notice.
SKF Patents include: #US04768380 • #US05679900 • #US05845230 • #US05854553 • #US05992237 • #US06006164 •
#US06199422 • #US06202491 • #US06275781 • #US06489884 • #US06513386 • #US06633822 • #US6,789,025 •
#US6,792,360 • US 5,633,811 • US 5,870,699 • #WO_03_048714A1
PUB CM/P8 11149-EN.US
• December 2017
Certain image(s) used under license from Shutterstock.com
Product Support Plans (PSP)
A range of Product Support Plans are
available to protect your investment.
Contact your local SKF Sales Representative
for additional information.
Ordering Information
Standard kit
The SKF Microlog CMXA 51-MSHA
Intrinsically Safe (IS) Portable Data
Collector / FFT Analyzer standard kit
includes:
• SKF Microlog CMXA 51-MSHA unit,
programmed for one-channel route
measurements and one-channel
off-route
• CD-ROM with user manuals, utilities,
asset information page and literature
• Accelerometer, ATEX (100 mVg)
[CMSS 793-EE]
• Accelerometer cable, CA-40, Fischer
four pin, 2 m
(6.6 ft.)
coil, to two pin
MIL [CMAC 5115]
• BNC cable adapter [CMAC 3715]
• RS232 communications cable
[CMAC 5201]
• Magnetic base accelerometer (pull-
strength, 20 kg,
1
/
4
™
28 UNF male
thread
†
35 mm two pole)
[CMSS 908-MD]
• MSHA-approved battery pack
[BP-7M]
• Power adapter / charger [CMAC 5110
(PSU-7)]
• Hard shell carrying case (transit case)
[CMAC 5118]
• Hand strap [CMAC 5013]
• Leather neck strap [CMAC 5113]
• Rubber boot [RB-1]
• Stylus [CMAC 5251]
Optional accessories
MSHA-approved for use with:
• CMXA 51-MSHA CMSS 797EE
(100 mV/g)
MSHA-approved vibration sensors for
permanent mounting underground:
• CMPT 2310AM (100 mV/g)
• CMPT 2323AM (230 mV/g)
MSHA BNC enclosure for terminating
permanently-mounted sensors:
• CMPT CPHD 04BM (four BNC terminals)
• CMPT CPHD 08BM (eight BNC terminals)
