SKF CMSS 785 Series, User Manual

Page: 9 / 52

3. Part no. and dimensional data
3.1 Probes
Three basic probe types are available: a 5 mm diameter tip, 8 mm tip and a reverse mount 8 mm
tip. These three are mechanically different but electrically equivalent: when considering permis-
sible system combinations only the cable length has to be considered, as described in 2.3 above.
Note that as indicated on the dimensional drawings, the actual physical length of probes and
cables may be longer than but not shorter than, the nominal length.
3.1.1 Probes: 5 mm
C M S S 7 5 - - - -
CMSS 75: 5 mm probe
Armor
L Without armor
A With armor (without
fluoro resin coating)
Thread size
M1 M8×1
U1 1/4-28 UNF
Unthreaded length (if M1)
10 mm increments,
0–230 mm; L1 ≤ L2–20 mm
e.g.
06 = 60 mm
Unthreaded length (if U1)
0.1 inch increments, 0–9.2 in
L1 ≤ L2 – 0.7 inches
e.g.
04 = 0.4 inches
Case length (if M1)
10 mm increments, 20–250 mm
e.g.
25 = 250 mm
Case length (if U1)
0.1 in increments, 0.8–9.9 inches
e.g.
35 = 3.5 inches
Cable length
05 0,5 m
10 1,0 m
50 5,0 m
90 9,0 m
L1 L2 L3
9 9