manualshive.com logo in svg

SKF CMAS 100-SL, Manual

Share
Download
SKF CMAS 100-SL Manual Download Page 18

 

6 

SKF Machine Condition Advisor 

 User 

Manual 

Battery and Battery Charger Safety 

Instructions 

Batteries are not fully charged out of the box.  Before 
using the batteries and charger, read and follow the 
safety instructions below. 

WARNING!  Failure to follow these safety 

instructions may result in risk of fire, electric 
shock, or electrocution - or damage to the device. 

•

 

Charge the device’s battery only with the 
recommended SKF battery charger. 

•

 

DO NOT immerse the device in water or other 
liquids. 

•

 

Use and store the device according to the 
following temperature ranges: 

Operating temperature range: 

   In use: -10 to +60° C (+14 to +140° F) 
   While charging: 0 to +40° C (+32 to +104° F)  

Storage temperature: 

   Less than one month: –20 to +45° C (–4 to 
+113° F) 
   More than one month but less than six 
months: –20 to +35° C (–4 to +95° F) 

•

 

WARNING!

  Shock hazard.  Do not allow 

liquids to get inside battery charger. 

•

 

Do not expose the charger to rain or snow. 

Summary of Contents for CMAS 100-SL










































Reviews:

No comments

Brands by name

Popular brands

Load more brands