Dismantling
10.1
Dismantling of CAHB-21
10.1.1
Separate actuator from energy supply (
1
†
Chapter
Operation
†
Disengagement in case of emergency
).
Secure elements of the application in such a fashion, that no loads
2
can impact the hinge heads.
Loosen and remove fastening bolts from the mounting strap of
3
the hinge heads.
Separate linear actuator from application elements.
4
Clean the actuator.
5
Carefully package for shipment to the manufacturer (
6
†
Chapter
Transport and packaging).
Disposal
10.2
To the extent that no take-back or disposal agreement has been put
in place, disassembled components should be recycled:
Dispose of metals and plastic components at an appropriate
•
recycling center.
Sort remaining components based on the respective material and
•
dispose of according to applicable local occupational health and
environmental regulations.
The local municipal authorities or specialized waste management
companies can provide information concerning environmentally
appropriate disposal.
Damage can be caused to the environment due to incorrect
disposal!
Electronic waste, electronic components, lubricants and other
additives are subject to special waste treatment regulations and
may only be disposed of by approved specialized companies!
C A U T I O N
39
ООО
"
Индастриал
Партнер
"
Авторизованный
дистрибьютор
SKF
www.skf.indpart.ru
8(495)223-07-69
Техническая
поддержка
:
[email protected], 8(495)223-07-69
