Fig. 9
9
Clicking on
pressure
displays:
9.1 Pressure to insure injector vent
– At start of lube cycle, pressure
reading from transducer must be
at or below this level. If using an
End of Line
pressure transducer,
reading is taken from this
transducer.
!
Notice
Option will only display in left side
window if
Pressure Transducer
option
selected.
9.2 Pump pressure at which lube
cycle ends
– If only using one
pressure transducer, lube cycle will
end at this setting.
!
Notice
For
step 9.2
, if using an
End of
Line
pressure transducer, pump will
stop at this pressure level to allow
dissipation of pressure in supply line.
Pump will restart once this pressure
level drops below 25% of this setting.
9.3 Line pressure at which lube cycle
ends
– sets
End of Line
pressure
transducer limit to end lubrication
cycle.
12
