PRODUCT SPECIFICATIONS
Enclosure mechanical drawings
SKF Multilog On-line System IMx-Rail
User Manual Supplement
Revision B
25 (29)
Figure 6
IMx-Rail enclosure pre-drilling
–
main long wall, 18 positions
The main wall gland area is for the majority of the user wiring (sensors etc.).
Figure 7
IMx-Rail enclosure pre-drilling
–
back long wall, 3 positions (1 connector in red)
The back-wall has three cable entries and the input power connector. This wall of the
enclosure is also fitted with a screw-in membrane vent located centrally but towards
the lid (that position is coloured orange
in
On the short wall (power connector end),
, there is one M32 opening that
acts as a port for access to the IMx-16Plus SIM card slot.
