5-3
Table Of Contents
www.SkeeterBoats.com
BOAT SYSTEMS
Battery Connections
See the manufacturer’s engine manual for battery requirements.
Maintain the battery or batteries following the manufacturer’s recommendations.
Disconnect all battery cables before servicing the boat, its electrical system, battery, or the outboards
and make sure metal objects do not touch the battery posts.
Figure 5-3 shows a typical 12-, 24-, and 36-volt connection.
Figure 5-3
WARNING
Keep the battery connections clean, tight, and insulated to prevent shorting or arching
and causing a possible explosion. Install protective covers and check the connections
often to make sure they are clean and tight.
DO NOT charge your batteries in the boat if your boat is not equipped with an onboard
charging system.
Make sure all accessories and outboards are in the OFF position before making any
battery connections.