10
SFC_Skeeta_Rigging_Guide_vol 1.2_Dec 2019
Undo one of the screws on the spreader end cap and place the wire in between the two bolt holes.
When tightening up, make sure the wire sits in the groove on the end cap.
3.
To adjust the spreader bar lengths;
Undo the ring and pull out the
3/16” clevis pin. The spreader bar can now sl
ide in and out of the
spreader base and be inserted into any hole.
Sail
The sail comes in its own bag with battens inserted, but not tightened. Use the allen key provided with the
sail to tension up the battens before hoisting the sail. The sail should have no wrinkles when rigged up with
the vang on.
1.
Attach the halyard loop to the top of the sail.
