manualshive.com logo in svg

SKC 225-69, Operating Instructions, Page: 4 / 4

Share
Download
SKC 225-69 Operating Instructions Download Page 4

Page 4

007-04-001 Issue F September 2018

SKC Limited 

11 Sunrise Park, Higher Shaftesbury Road, Blandford Forum, Dorset DT11 8ST

 United Kingdom

T: +44 (0) 1258 480188   F: +44 (0) 1258 480184   E: [email protected]   W: www.skcltd.com

A member of the SKC  global group of companies

Summary of Contents for 225-69

Page 1: ...etal filter support grid and a sealing clip to prevent contamination of the sample during transport for laboratory analysis For detailed instructions on air sampling in general and use of the cyclone sampler in particular refer to SKC s 224 G1 Step by Step Guide to Air Sampling It is also recommended to obtain and read the document MDHS 14 4 General methods for sampling and gravimetric analysis of...

Page 2: ...fit Fitting the cassette into the cyclone sampler Referring to Figure 2 ensure that the large O ring is fitted to the sampler body beneath the sampler insert and the small O ring is fitted over the short tube in the middle of the insert Fit the assembled cassette into the cyclone insert with the cassette top upwards Check that the thin O ring is fitted into the recess in the underside of the sampl...

Page 3: ... onto the filter support grid and re assemble the cassette Fit the cassette into the cyclone sampler Quickly re check the flow rate and make any final adjustments Switch the sample pump off The cyclone sampler is now ready for sampling After Sampling Away from the sample location quickly check the sample flow rate then disconnect the tubing from the cyclone sampler air inlet and outlet Carefully r...

Page 4: ...ptember 2018 SKC Limited 11 Sunrise Park Higher Shaftesbury Road Blandford Forum Dorset DT11 8ST United Kingdom T 44 0 1258 480188 F 44 0 1258 480184 E info skcltd com W www skcltd com A member of the SKC global group of companies ...

Reviews:

No comments