Form 37712 Rev 1702
Page 3 of 14
Turn Pump Power On/Off
(Figure 1)
Turn on:
Remove the tamper-resistant cover. Move the on/o
ff
switch to ON.
Turn o
ff
:
Move the on/o
ff
switch to OFF.
Use the Pump with AC Power
(Power option in non-hazardous locations)
Do not use the pump with the Battery Eliminator in hazardous locations. UL Listing for intrinsic safety is not in effect during pump
operation with Battery Eliminator.
The Battery Eliminator is an accessory that converts alternating current (AC) to direct current (DC) from which the pump can be
operated for extended runs.
The Battery Eliminator should be used in non-hazardous locations only.
See Accessories.
1. Remove the ba
tt
ery pack from the pump
(see Replace the Ba
tt
ery Pack)
.
2. The
Ba
tt
ery Eliminator is comprised of two pieces, a wall cube and a power adapter: Plug the wall cube into a standard wall outlet
and insert its plug end into the power adapter.
3. Fit the power adapter on the pump in place of the ba
tt
ery pack.
