STRAPPABLE CONNECTION
Strappable connection makes two of same amplifiers strapped to 2 ohm.
Strappable connection makes the power double than their 1 ohm power.
Please read the following connection and diagram carefully to make correct connection.
INPUT CONNECTION ;
Step 1. Connect the Master amplifier to the head-unit and set its output master / input slave switch to
output master.
Step 2. Set Slave amplifier output master / input slave switch to slave input.
Step 3. Connect RCA cable from the master to slave amplifier as shown in the diagram.
POWER & SPEAKER CONNECTION ;
Step 1. Connect speaker cable ( ) on master amplifier to subwoofer ( )
Step 2. Connect speaker cable ( ) on slave amplifier to subwoofer ( )
Step 3. Connect speaker cable ( ) on master amplifier to speaker cable ( ) on slave amplifier
+12V SOURCE
Fully adjusted signal is transferred from master to slave amp via Rca cable.
Master amplifier controls all crossover and remote control over Slave amplifier
MASTER AMPLIFIER
SLAVE AMPLIFIER
Wired Remote Control
Set switch on OUTPUT MASTER
Set switch on INPUT SLAVE
