1. Cleaning the device
- Turn off the machine and unplug power cord.
- Add several drops of detergent on cotton rag or towel. Don't pour the detergent on the
belt directly, and don't use acid or corrosive cleaners.
- Wipe off dust and stains on the frame, front panel and belt. Do not wipe the backside of
the belt.
- After using for a period, dust and stains may appear on the back part - that is normal.
Just clean carefully.
- Press and hold Mode Switch and Acceleration Button on the remote control for 3
seconds.
- Front panel shows "CALI" and the speed is 4 km/h (2.5 mi/hr).
- If belt deviates to the left: Turn the left adjusting screw for a half-circle clockwise.
- If belt deviates to the right: Turn the right adjusting screw for a half-circle clockwise.
- If belt is slipping: Turn both left and right adjusting screws for a half-circle clockwise at
the same time.
- Keep the machine running for 1-2 minutes and check whether a readjustment is neces-
sary.
- Turn off the machine and unplug the power cord.
- Lift up the belt and apply silicone oil on the backside of the belt.
- Turn on the machine again
- Keep the machine running below 4 km/h (2.5 mi/hr) for 10-20 seconds.
- Only apply 5 ml ~ 10 ml lubricant oil each time, too much lubricant makes the belt
become slipping.
- Apply silicone oil once every 3 months.
5. Safety Notice
6. Maintenance and Service
15
16
Children should be
supervised to ensure that
they do not play with the
WalkingPad.
Please do not use the
walking machine if you
are pregnant or facing
medical problems.
Please keep your sight
horizontal to avoid dizziness.
More than one person
on the WalkingPad is
prohibited.
Using machine with
pets is prohibited
.
Walking sideways on
the machine is
prohibited.
Walking backwards on
the machine is
prohibited.
Trampling the machine
head is prohibited.
Horizon
2. Adjusting the belt
3. Lubricating the belt
