Skandia Elevator SE 140, Maintenance Instructions Manual, Page: 16 / 24

16
SKANDIA ELEVATOR
Motor stoppage
If the elevator is first in a chain of conveyors, fit and use inlet slide. See
assembly instructions for the elevator.
If the motor stops:
1. check the cause of the stoppage. See the previous troubleshooting
directions concerning this.
2. cut the power and clear away any blockages.
!
IMPORTANT!
Do not try to remove a blockage by repeatedly attempting to restart.
3. check with the electrician that the motor has been connected to the correct
voltage and that the motor protection is set to the right value.
2-3 way valve leaking
Valve is set correctly on delivery. If the setting has changed after delivery, it
could cause leakage. Renew the setting in accordance with the instructions
in the separate accessory assembly instructions, Replace actuator, which are
available for download on the Skandia Elevator website.