11
SKANDIA ELEVATOR – SEH 50/18, 50/23 & 63/30
Before assembly
!
IMPORTANT!
• Sections can be assembled together to a maximum of 8 metres in
length and then lifted into place. The weight must be distributed over
several lifting points.
• Ensure that the bracing requirements are followed for the elevator as
specified in the Assembly, machine chapter, in the Legs and Elevator
head sections.
• Ensure there is no risk of the elevator boot standing in water. Lift/
raise it if necessary.
NB! Position the elevator boot so that the clean out hatches on all sides
of the boot (A) are accessible and so that the planned connections can be
made.
The elevator boot is prepared for feeding to the upward side plate.
a.
When feeding from both side plates, remove the cover plate (B) from the
downward side plate and refit the rib plate (C) as illustrated.
b.
When feeding to the downward side plate only, first remove the rib plates (C)
from both side plates, move the cover plate (B) from the downward to the
upward side plate and then refit the rib plates (C) on both side plates, turn
the rib plates as illustrated.
A
A
B
C
C
b.
C
B
a.
Summary of Contents for H-LINE 50/18
Page 1: ...ASSEMBLY INSTRUCTIONS H LINE New generation SEH 50 18 50 23 63 30 ZMA015GB 2020 09 01...
Page 2: ......
Page 4: ......
