
How to recharge the battery
Plug the power cord of the charger in the outlet.
(100V~240V)
< Travel Charger – TC >
You can connect the charger to the phone without using the desktop holder.
Remove the rubber cap on the bottom of the phone before recharging the battery.
< Desktop Holder – DTH >
Connect the holder with the travel charger. You can recharge the battery separately or as it is installed
on the phone. Push the battery along with the groove of the holder.
- Do not recharge the batteries on the desktop holder at the same time. Recharge the battery only or as
it is installed on the phone.
- Recharging starts as the red lamp on the upper part of the charger is on. The lamp turns into green as
the battery is fully recharged.
- The lamp blinks if the battery is not properly contacted with the charger. Pull out the charger, and
reconnect the battery.
- Use the approved charger only. Using an unapproved charger may cause malfunction or damage.
Minimum recharge time
Type of battery
Battery
Minimum recharge time
About 00 minutes
* When purchased, the battery is not fully charged. Make sure to charge the battery fully before use.
* Recharging batter in severe hot or cold may vary the charge time.
* If you recharge the battery with the phone switched on, although the full charge icon is displayed,
the battery may not be 100% fully charged.
20