#1 Design
The ‘SK ClickClick’ Quick Release System was designed for riders who are looking for a
compact, lightweight, functional, high-end and safe solution for the connection between their
kite and harness. The major benefits of this product compared to other release systems are
three-fold; lightweight, small in size and a low friction integrated ball-bearing swivel. These
benefits will bring the kite bar closer to the body, allow your kite equipment to be lighter and
allow the untwisting of your front lines to be easier than ever before. This device has not been
designed for riders who practice unhooked (disconnecting the release system from the harness)
manoeuvres or any kind of soaring/flying application.
This Quick Release System was designed to be used exclusively in combination with an SK
control bar and a rig manufactured by SK Shapes. The SK ClickClick has been designed for
experienced riders and professional athletes.
#2 Replacing the Depower & Safety Line
When the depower line or the safety line need to be replaced, make sure to use parts exclusively
provided by SK Shapes. Parts from other manufacturers may impede the proper functioning of
the system.
Replacing or changing the depower line is relatively easy. Follow the instructions below:
Loosen the two screws
on the bottom plate
spinner with a 2mm hex
key.
Make sure that all parts are
present: two screws, bottom
plate spinner and the
dogbone.
Guide the depower line
through the entire release
system and put the dogbone
into the eyesplice loop of the
depower line.
Insert the doggone into the
bottom plate spinner and
place the two screws in the
holes.
Place the assembled bottom
plate spinner into the cavity
and tighten the screws
(torque: 0.5Nm - finger tight).
