PiCAN FD Rev B 1.1
SK Pang Electronics Ltd
©
2017
www.skpang.co.uk
5
1.5.
Screw Terminal
The CAN connection can also be made via the 4 way screw terminal.
Note : The +12v In is only used on the PiCAN2 FD board with SMPS option fitted.
1.6.
120
Ω
Terminator
There is a 120
Ω
fitted to the board. To use the terminator solder a 2way header pin to
JP3 then insert a jumper.
1.7.
LED
There is a red LED fitted to the board. This is connected to GPIO22.
1.8.
Not Fitted Items
JP5 can be use to power a serial LCD with data on TXD line from the Pi. There is also
5v supply on JP5.
Switch mode power supply, this is a 5v module that can power the Pi. It has an input
voltage range of 6v to 30v.
Pin number
Function
1
CAN_H
2
CAN_L
3
GND
4
+12v In
