·
If the kettle ever boils dry, the power indicator will go out. Lift the on/off switch and unplug.
Allow 15 minutes to cool before refilling with cold water. The safety cutout will automatically
reset during this time.
·
Place the kettle on a stable flat surface.
·
Ensure that the kettle is switched off before removing it from its stand.
·
Do not remove the kettle from its stand during operation. Do not open the top lid during
operation.
·
Never immerse the kettle or cord in water or any other liquid. Do not allow liquid to
penetrate the electrical parts of this kettle.
·
Prevent children from pulling on the mains cord or knocking the kettle over.
·
Ensure that the mains lead does not overhang the worktop surface.
·
Before cleaning the kettle disconnect from the power supply and wait until it was cooled
down.
·
Only use the cord supplied with this kettle. If a replacement is required, only approved
components may be used.
·
The outside surface of the kettle may get hot during use, please take care when using the
kettle.
·
Never fill in water more than the maximum acceptable water level.
·
This appliance is intended to be used in household only.
Before first use
Before first use, it is recommended to operate the kettle for 2 or 3 times following the
instructions above, this will remove any dust or residues remaining from the manufacturing
process.
·
Take up the jug kettle from the base before filling.
·
To fill the jug kettle, open the cover by pressing the lid button downwards, then fill to the
desired level (min0.5L-Max.1.7L), close the lid by pressing it down until it clicks into place.
·
Plug the power supply cord into the main, press the On/Off switch down, the power indicator
lights up.
·
When the water has boiled the kettle will automatically switch itself off. You can stop the
boiling process at any time by lifting the On/Off switch. The power indicator will go out.
Note:
Do not open the lid when steam is coming out of the spout.
3
